Repairs and Leak Tracing
Targeted roof repair for lifted shingles, failed flashing around chimneys and vents, and leaks at dormers. We trace the water path from the attic before deciding what to fix.

Fixall Roofing offers roofing in Grimsby for homes squeezed between Lake Ontario and the Niagara Escarpment, from the painted Grimsby Beach cottages to new waterfront townhomes and houses on the escarpment above the QEW. We are a Burlington roofing contractor, and Grimsby, the first Niagara Region town along the QEW, is the eastern edge of the area we cover, reached over the Skyway.
Each part of town asks something different of a roof. Lakefront homes take the brunt of storms off open water, escarpment lots hold snow and ice longer, and older houses downtown often come with heritage rules and several old layers to strip.
We roof for cottage owners at the beach, families in the newer lakeside townhomes and owners of older houses on Main Street and up the slope. The right shingle, fastening and permit route differ for each, so we plan every Grimsby job around where the house sits.
Most Grimsby homes fall into four groups: the old camp-meeting cottages at Grimsby Beach, lakeside townhomes and condos near Casablanca Boulevard, older houses around Main Street and the downtown, and homes on the escarpment bench. Our services are the same in each, but the details change with the exposure and the age of the building.
Targeted roof repair for lifted shingles, failed flashing around chimneys and vents, and leaks at dormers. We trace the water path from the attic before deciding what to fix.
Tear-off and roof replacement with new underlayment, eave protection, ventilation and flashing. On exposed lots, we specify high-wind shingles and a stronger nailing pattern from the start.
Soft-wash roof cleaning for moss and algae on shaded cottages and older homes under mature trees, plus eavestrough clearing before winter.
Grimsby Beach began as a Methodist camp-meeting ground on the lakeshore in the mid 1800s and became a permanent campground in 1859. Tent lots were laid out in a circle, and by the 1870s families were replacing canvas tents with small wood-frame cottages on the same narrow lots.
Many of those cottages survive, painted in bright colours with gingerbread trim along steep front gables. The Grimsby Park Gate on Phelps Avenue is a designated heritage property, a reminder of the period when the grounds were known as the Chautauqua of Canada.
These roofs are small, steep and close together, so the work is closer to carpentry than production roofing. We protect decorative bargeboards and finials during tear-off, use hand-cut shingles at tight gables and keep debris off neighbouring cottages that may sit only a few feet away.
Material choice matters here too. We usually suggest a shingle colour and profile that suits a 19th century cottage, and if a cottage is designated, we confirm with the Town before changing materials or trim.

Grimsby's shoreline faces open water, and storms from the north and northeast push wind across many kilometres of lake before it reaches the first row of homes. Waterfront townhomes and condo buildings around Casablanca Boulevard, and the cottages near the beach, take the full force of it.
For these roofs we use shingles rated for high wind under ASTM D7158 or D3161, six nails per shingle instead of four, adhesive starter strips at every eave and rake, and ridge vents tested against wind-driven rain. Edges matter most, because that is where wind lifts a roof first.
After a storm, we document wind and storm damage with photos for your insurer and tarp open areas as soon as conditions on the roof are safe. In a condominium or townhome complex, the roof is often common property, so we work with the board or property manager on approvals and scheduling.
Grimsby was founded by Loyalists in 1790, and Main Street East and West carry much of its history. The Town counts 93 designated heritage properties, with most of them concentrated along Main Street.
Older houses near the downtown and around Forty Mile Creek tend to have board decking, two or more old layers of shingles and brick chimneys sealed with tar or mortar rather than metal flashing. We strip to the deck, replace rotten boards, add sheathing where needed and install proper step and counter-flashing at every chimney.
If your home is designated, the Town requires a heritage permit for alterations, and it also runs a Heritage Property Grant Program for designated property owners. Ask the Town's planning staff whether your roof work qualifies before you finalise a quote.
South of the QEW, the land climbs toward the escarpment brow, the Bruce Trail and the Beamer Conservation Area. Homes on the upper slopes and the bench above see stronger gusts than the lakeshore towns below, and they often hold more snow in winter.
On these lots, we pay extra attention to ice dam protection, extending self-adhered membrane further up the slope on low-pitch sections and over every valley. Good attic ventilation keeps the deck cold so snow does not melt and refreeze at the eaves.
Ridge caps and rakes on exposed elevations get the same high-wind detailing we use on the lakefront. Access can be tight on steep driveways, so we plan bin placement and material drop before the job starts.
Grimsby is a lower-tier municipality in Niagara Region, and building permits come from the Town of Grimsby Building Division at Town Hall on Livingston Avenue, not from Hamilton or Burlington. Permits are issued under the Ontario Building Code.
Across Ontario, replacing shingles with the same material on an existing roof generally does not need a building permit, while structural work, new skylight openings, dormers and roof-mounted solar usually do. We confirm the Town's current position for your specific scope before work starts rather than assuming Burlington's rules apply.
Heritage approvals run through the Town's Planning Department, with advice from the Grimsby Heritage Advisory Committee. If your property is designated, allow time for a heritage permit before booking a start date.
From 700 Ross Street, Grimsby is roughly 35 to 40 kilometres along the QEW, across the Burlington Bay James N. Allan Skyway and through Stoney Creek. That is about 30 minutes outside rush hour and 45 minutes or more when the Skyway or the Niagara-bound QEW is backed up.
We answer the phone 24/7, and for an active leak our first job is to stop the water with a tarp or temporary patch. Because Grimsby is at the edge of our radius, we tell you honestly how long the trip will take before we set out, rather than promising a time we cannot keep.
During widespread wind events, we prioritise active leaks and safety hazards across the whole service area. If water is coming in, move valuables, catch drips and call us right away, even at night.
We do not list addresses or present made-up jobs as case studies. These are the types of Grimsby work we are most often asked to quote.
Small, steep Grimsby Beach roofs re-shingled with careful protection of trim and neighbouring cottages.
Replacing torn-off shingles, ridge caps and rake edges on lakefront homes after a northeast blow.
Replacing tar and mortar seals with metal flashing on older brick homes near Main Street.
Adding membrane and ventilation on upper-slope homes where ice keeps forming at the eaves.
We only display reviews customers have actually posted. You can read them by searching Fixall Roofing on Google Maps and opening the reviews on our Business Profile, then searching the text for Grimsby.
When you compare contractors who travel in from Hamilton or Burlington, look for reviews that mention punctuality and communication. Those comments show whether a roofer manages distance well.
Yes. We treat them as detail work: protecting gingerbread trim, hand-cutting shingles at tight gables and keeping debris off the cottages next door. If the cottage is designated, we confirm heritage requirements with the Town before changing materials.
Yes, but it sits at the edge of our roughly 30-minute radius from Burlington. Expect about 30 minutes of travel via the QEW outside rush hour, and longer when the Skyway is congested.
They need stronger detailing rather than a different roof. We use high-wind rated shingles, six nails per shingle, adhesive starter strips at every edge and wind-tested ridge vents, because edges are where lake winds lift a roof first.
Tell us where your home sits, whether at the beach, on the waterfront or up the escarpment, and what you have noticed. We will schedule an inspection, photograph the roof and send a written quote that accounts for wind exposure and any heritage requirements.
For an active leak, call any time and we will give you an honest arrival estimate.
Phones answered 24/7, including emergencies.